Prevor Group
Range
Multi-purpose neutralizing absorbent for chemicals
TRIVOREX®Acicaptal®Basicaptal®
Range
Chemical Decontaminants
Safurex®LeVert HFLeVert
Range
Universal dryer for common liquids
Polycaptor®

I work in a public place

Paint, dye or glue spills
When paint, oil or other thick liquids spill, the ground becomes slippery and extremely difficult to dry. This can cause slips, or even falls of customers or employees and can degrade the equipment. Even if the liquid is picked up, there will be traces and the floor may still be greasy and cause accidents.

FREQUENTLY ASKED QUESTIONS

How to absorb oil while leaving a dry floor?
  1. Inform people in the vicinity to avoid the risk of slipping or falling.
  2. Use POLYCAPTOR® universal absorbent to create a dam around the spill. Absorb the spill.
  3. Collect the residue. The absorbent will mix with the oil without leaving any residue or trace, even on irregular surfaces.
How to absorb and clean flocculant polymers?
  1. Inform people in the vicinity of the risk of slipping or falling..
  2. Use POLYCAPTOR® universal absorbent to create a dam around the spill. Absorb the spill.
  3. Leave it for a few minutes and then pick up the residues. The absorbent will mix with the flocculant polymers without leaving any residue or trace, even on irregular surfaces.
How to pick up a paint spill?
  1. Inform people in the vicinity of the risk of slipping or falling.
  2. Use POLYCAPTOR® universal absorbent to create a dam around the spill. Absorb the spill.
  3. Collect the residues. The absorbent will mix with the paint without leaving any residue or trace, even on irregular surfaces.
How to absorb solvents?

This procedure applies in the event of a minor spill that can be managed internally:

  1. Inform people in the vicinity of the hazard. Then find the right equipment to protect yourself and secure the area.
  2. Make a dam around the spill with TRIVOREX® versatile neutralizing absorbent (compatible with all solvents) or POLYCAPTOR® universal absorbent. Then put the absorbent on the spill and wait a few minutes for complete absorption of the liquid. It will allow you to pick up residues more easily without leaving slippery or hazardous marks on the ground.
  3. Collect residue and remove the waste in accordance with the applicable national regulations..

Print your safety protocol

Download the protocol
crossmenu